Thank you for choosing a slate name plaque from G. A. Cannell
Memorials. With minimal care you will find that it will last for years.
FIXING
Your slate plaque will have been supplied with screw holes already in
place along with brass screws and fixings. When fixing it to the wall take care not to
tighten the screws too tightly as this could cause the slate to crack.
AFTERCARE
The slate, when supplied, will have been treated with a small amount of
linseed oil across it. This brings out the dark colour of the slate and helps to protect
it from the elements. This process should be repeated approximately every 12 18
months by putting a tiny amount of linseed oil on a cloth and then rubbing it into
and over the slate until all areas are evenly covered.
If you have specifically requested on ordering that you do not wish
your slate plaque to be treated in this way, it will be supplied without any treatment to
the surface and will thus be a much lighter grey in colour. You may find that over the
years the weather may cause the slate to discolour this is completely natural and
replicates what happens to the material in its natural state.
FURTHER ADVICE
If at any time you require further advice or assistance on the care of
your name plaque, please do not hesitate to contact us at any time we would be
pleased to help.
I hope that you are happy with your plaque and that it will complement
your home for years to come.